Lung-to-finger circulation time can be measured stably with high reproducibility by simple breath holding method in cardiac patients.

Lung to finger circulation time (LFCT) has been used to estimate cardiac function. We developed a new LFCT measurement device using a laser sensor at fingertip. We measured LFCT by measuring time from re-breathing after 20 s of breath hold to the nadir of the difference of transmitted red light and infrared light, which corresponds to percutaneous oxygen saturation. Fifty patients with heart failure were enrolled. The intrasubject stability of the measurement was assessed by the intraclass correlation coefficient (ICC). The ICC calculated from 44 cases was 0.85 (95% confidence interval: 0.77-0.91), which means to have "Excellent reliability." By measuring twice, at least one clear LFCT value was obtained in 89.1% of patients and the overall measurability was 95.7%. We conducted all LFCT measurements safely. High ICCs were obtained even after dividing patients according to age, cardiac index (CI); 0.85 and 0.84 (≥ 75 or < 75 years group, respectively), 0.81 and 0.84 (N = 26, ≥ or < 2.2 L/min/M2). These results show that our new method to measure LFCT is highly stable and feasible for any type of heart failure patients.

A detection system of exercise electrocardiogram / Um sistema de detecção de eletrocardiograma de exercício / Un sistema de detección de electrocardiograma de ejercicio

ABSTRACT Introduction: A new exercise electrocardiogram (ECG) detection system was investigated in this study to diagnose and analyze cardiopulmonary function and related diseases in a comprehensive and timely manner and improve the accuracy of diagnosis. Besides, its reliability and clinical applicability were judged. Objective: A new type of exercise ECG detection system was constructed by adding parameters such as respiratory mechanics, carbon dioxide, and oxygen concentration monitoring based on the traditional ECG detection system. Methods: The new system constructed in this study carried out the ECG signal detection, ECG acquisition module, blood pressure and respiratory mechanics detection and conducted a standard conformance test. Results: The heart rate accuracy detected by the exercise ECG system was greatly higher than that of the doctor's manual detection (P < 0.05). The accuracy of the new exercise ECG detection system increased obviously in contrast to that of the manual detection result (P < 0.05). The key technical index input noise and input impedance test results (24.5 μV and 12.4 MΩ) of the exercise ECG detection system conformed to the standard (< 30 μV and > 2.5 MΩ). The common-mode rejection and sampling rate test results (103.5 dB and 515 Hz) of key technical indicators in the exercise ECG detection system were all in line with the standards (≥89 dB and ≥500 Hz). Conclusion: The complete exercise ECG detection system was constructed through the ECG acquisition module, blood pressure detection, and respiratory mechanics detection module. In addition, this system could be applied to detect ECG monitoring indicators with high accuracy and reliability, which could also be extensively adopted in clinical diagnosis. Level of evidence II; Therapeutic studies - investigation of treatment results.

RESUMO Introdução: Um novo sistema de detecção de eletrocardiograma de exercício (ECG) foi investigado neste estudo para diagnosticar e analisar a função cardiopulmonar e doenças relacionadas de maneira abrangente e oportuna e melhorar a precisão do diagnóstico. Além disso, sua confiabilidade e aplicabilidade clínica foram julgadas. Objetivo: Um novo tipo de sistema de detecção de ECG de esforço foi construído adicionando parâmetros como mecânica respiratória, dióxido de carbono e monitoramento da concentração de oxigênio com base no sistema de detecção de ECG tradicional. Métodos: O novo sistema construído neste estudo realizou a detecção do sinal de ECG, módulo de aquisição de ECG e detecção de pressão arterial e mecânica respiratória, e conduziu um teste de conformidade padrão. Resultados: A precisão da frequência cardíaca detectada pelo sistema de ECG de esforço foi muito maior do que a detecção manual do médico (P <0,05). A precisão do novo sistema de detecção de ECG de esforço aumentou obviamente em contraste com o resultado da detecção manual (P <0,05). O ruído de entrada do índice técnico principal e os resultados do teste de impedância de entrada (24,5 μV e 12,4 MΩ) do sistema de detecção de ECG de esforço estão em conformidade com o padrão (<30 μV e> 2,5 MΩ). A rejeição do modo comum e os resultados do teste de taxa de amostragem (103,5 dB e 515 Hz) dos indicadores técnicos principais no sistema de detecção de ECG de esforço estavam todos alinhados com os padrões (≥89 dB e ≥500 Hz). Conclusão: O sistema completo de detecção de ECG de esforço foi construído através da combinação de módulo de aquisição de ECG, detecção de pressão arterial e módulo de detecção de mecânica respiratória. Além disso, esse sistema poderia ser aplicado à detecção de indicadores de monitoramento de ECG com alta precisão e confiabilidade, o que poderia ser amplamente adotado no diagnóstico clínico. Nível de evidência II; Estudos terapêuticos- investigação dos resultados do tratamento.

RESUMEN Introducción: En este estudio se investigó un nuevo sistema de detección de electrocardiograma de esfuerzo (ECG) para diagnosticar y analizar la función cardiopulmonar y enfermedades relacionadas de manera integral y oportuna, y mejorar la precisión del diagnóstico. Además, se evaluó su confiabilidad y aplicabilidad clínica. Objetivo: Se construyó un nuevo tipo de sistema de detección de ECG de ejercicio agregando parámetros como la mecánica respiratoria, el dióxido de carbono y el monitoreo de la concentración de oxígeno sobre la base del sistema de detección de ECG tradicional. Métodos: El nuevo sistema construido en este estudio llevó a cabo la detección de la señal de ECG, el módulo de adquisición de ECG y la detección de la presión arterial y la mecánica respiratoria, y realizó una prueba de conformidad estándar. Resultados: la precisión de la frecuencia cardíaca detectada por el sistema de ECG de ejercicio fue mucho mayor que la de la detección manual del médico (P <0,05). La precisión del nuevo sistema de detección de ECG de esfuerzo aumentó obviamente en contraste con el resultado de la detección manual (P <0.05). Los resultados de la prueba de impedancia de entrada y ruido de entrada de índice técnico clave (24,5 μV y 12,4 MΩ) del sistema de detección de ECG de esfuerzo cumplieron con el estándar (<30 μV y> 2,5 MΩ). Los resultados de la prueba de frecuencia de muestreo y rechazo en modo común (103,5 dB y 515 Hz) de los indicadores técnicos clave en el sistema de detección de ECG de esfuerzo estaban en línea con los estándares (≥89 dB y ≥500 Hz). Conclusión: El sistema completo de detección de ECG de ejercicio se construyó mediante la combinación del módulo de adquisición de ECG, la detección de la presión arterial y el módulo de detección de la mecánica respiratoria. Además, este sistema podría aplicarse a la detección de indicadores de monitoreo de ECG con alta precisión y confiabilidad, que también podría adoptarse ampliamente en el diagnóstico clínico. Nivel de evidencia II; Estudios terapéuticos- investigación de los resultados del tratamiento.

An engineering perspective on the development and evolution of implantable cardiac monitors in free-living animals.

The latest technologies associated with implantable physiological monitoring devices can record multiple channels of data (including: heart rates and rhythms, activity, temperature, impedance and posture), and coupled with powerful software applications, have provided novel insights into the physiology of animals in the wild. This perspective details past challenges and lessons learned from the uses and developments of implanted biologgers designed for human clinical application in our research on free-ranging American black bears (Ursus americanus). In addition, we reference other research by colleagues and collaborators who have leveraged these devices in their work, including: brown bears (Ursus arctos), grey wolves (Canis lupus), moose (Alces alces), maned wolves (Chrysocyon brachyurus) and southern elephant seals (Mirounga leonina). We also discuss the potentials for applications of such devices across a range of other species. To date, the devices described have been used in fifteen different wild species, with publications pending in many instances. We have focused our physiological research on the analyses of heart rates and rhythms and thus special attention will be paid to this topic. We then discuss some major expected step changes such as improvements in sensing algorithms, data storage, and the incorporation of next-generation short-range wireless telemetry. The latter provides new avenues for data transfer, and when combined with cloud-based computing, it not only provides means for big data storage but also the ability to readily leverage high-performance computing platforms using artificial intelligence and machine learning algorithms. These advances will dramatically increase both data quantity and quality and will facilitate the development of automated recognition of extreme physiological events or key behaviours of interest in a broad array of environments, thus further aiding wildlife monitoring and management. This article is part of the theme issue 'Measuring physiology in free-living animals (Part I)'.

Towards non-invasive heart rate monitoring in free-ranging cetaceans: a unipolar suction cup tag measured the heart rate of trained Risso's dolphins.

Heart rate monitoring in free-ranging cetaceans to understand their behavioural ecology and diving physiology is challenging. Here, we developed a simple, non-invasive method to monitor the heart rate of cetaceans in the field using an electrocardiogram-measuring device and a single suction cup equipped with an electrode. The unipolar suction cup was placed on the left lateral body surface behind the pectoral fin of Risso's dolphins (Grampus griseus) and a false killer whale (Pseudorca crassidens) in captivity; their heart rate was successfully monitored. We observed large heart rate oscillations corresponding to respiration in the motionless whales during surfacing (a false killer whale, mean 47 bpm, range 20-75 bpm; Risso's dolphins, mean ± s.d. 61 ± 15 bpm, range 28-120 bpm, n = 4 individuals), which was consistent with the sinus arrhythmia pattern (eupneic tachycardia and apneic bradycardia) observed in other cetaceans. Immediately after respiration, the heart rate rapidly increased to approximately twice that observed prior to the breath. Heart rate then gradually decreased at around 20-50 s and remained relatively constant until the next breath. Furthermore, we successfully monitored the heart rate of a free-swimming Risso's dolphin. The all-in-one suction cup device is feasible for field use without restraining animals and is helpful in further understanding the diving physiology of free-ranging cetaceans. This article is part of the theme issue 'Measuring physiology in free-living animals (Part II)'.

Highly Linear Phase-Canceling Self-Injection-Locked Ultrasonic Radar for Non-Contact Monitoring of Respiration and Heartbeat.

A novel phase-canceling demodulation scheme to improve the linearity of a self-injection-locked (SIL) ultrasonic radar is proposed with the goal of solving the null detection problem and accurately sensing large displacements of a moving target. A proportional-integral (PI) controller regulates the phase of the injection signal and cancels the Doppler phase shift by tuning a delay in the received echo signal, and this tunable delay serves as the radar output, which is linearly proportional to the displacement of the target. Without assuming weak injection, the frequency and phase equations for an SIL oscillator are derived, supporting the construction of a plant model and the design of a PI controller. Also, a new ultrasonic radar equation is presented for estimating the radar detection range. The SIL radar with phase regulation is operated in its anti-phase injection mode for better performance. The proposed design is implemented on an FPGA to make a 40 kHz continuous-wave ultrasonic radar. The maximum detectable peak-to-peak motion is up to 120 mm (approximately 14 wavelengths of displacement), with a total harmonic distortion as low as 2.3% for the detection of 1 Hz harmonic motion. The radar is used to detect the human chest movement for non-contact monitoring of the respiratory rate and heart rate. Due to the high linearity and sensitivity, the radar is capable of faithfully detecting the relatively large involuntary body movements and lung movements while still preserving the weak heartbeat rhythm buried in them, with the average error of measured heart rates less than 1 BPM.

Accelerated magnetic resonance imaging tissue phase mapping of the rat myocardium using compressed sensing with iterative soft-thresholding.

INTRODUCTION: Tissue Phase Mapping (TPM) MRI can accurately measure regional myocardial velocities and strain. The lengthy data acquisition, however, renders TPM prone to errors due to variations in physiological parameters, and reduces data yield and experimental throughput. The purpose of the present study is to examine the quality of functional measures (velocity and strain) obtained by highly undersampled TPM data using compressed sensing reconstruction in infarcted and non-infarcted rat hearts. METHODS: Three fully sampled left-ventricular short-axis TPM slices were acquired from 5 non-infarcted rat hearts and 12 infarcted rat hearts in vivo. The datasets were used to generate retrospectively (simulated) undersampled TPM datasets, with undersampling factors of 2, 4, 8 and 16. Myocardial velocities and circumferential strain were calculated from all datasets. The error introduced from undersampling was then measured and compared to the fully sampled data in order to validate the method. Finally, prospectively undersampled data were acquired and compared to the fully sampled datasets. RESULTS: Bland Altman analysis of the retrospectively undersampled and fully sampled data revealed narrow limits of agreement and little bias (global radial velocity: median bias = -0.01 cm/s, 95% limits of agreement = [-0.16, 0.20] cm/s, global circumferential strain: median bias = -0.01%strain, 95% limits of agreement = [-0.43, 0.51] %strain, all for 4x undersampled data at the mid-ventricular level). The prospectively undersampled TPM datasets successfully demonstrated the feasibility of method implementation. CONCLUSION: Through compressed sensing reconstruction, highly undersampled TPM data can be used to accurately measure the velocity and strain of the infarcted and non-infarcted rat myocardium in vivo, thereby increasing experimental throughput and simultaneously reducing error introduced by physiological variations over time.

Performance Analysis of Gyroscope and Accelerometer Sensors for Seismocardiography-Based Wearable Pre-Ejection Period Estimation.

OBJECTIVE: Systolic time intervals, such as the pre-ejection period (PEP), are important parameters for assessing cardiac contractility that can be measured non-invasively using seismocardiography (SCG). Recent studies have shown that specific points on accelerometer- and gyroscope-based SCG signals can be used for PEP estimation. However, the complex morphology and inter-subject variation of the SCG signal can make this assumption very challenging and increase the root mean squared error (RMSE) when these techniques are used to develop a global model. METHODS: In this study, we compared gyroscope- and accelerometer-based SCG signals, individually and in combination, for estimating PEP to show the efficacy of these sensors in capturing valuable information regarding cardiovascular health. We extracted general time-domain features from all the axes of these sensors and developed global models using various regression techniques. RESULTS: In single-axis comparison of gyroscope and accelerometer, angular velocity signal around head to foot axis from the gyroscope provided the lowest RMSE of 12.63 ± 0.49 ms across all subjects. The best estimate of PEP, with a RMSE of 11.46 ± 0.32 ms across all subjects, was achieved by combining features from the gyroscope and accelerometer. Our global model showed 30% lower RMSE when compared to algorithms used in recent literature. CONCLUSION: Gyroscopes can provide better PEP estimation compared to accelerometers located on the mid-sternum. Global PEP estimation models can be improved by combining general time domain features from both sensors. SIGNIFICANCE: This work can be used to develop a low-cost wearable heart-monitoring device and to generate a universal estimation model for systolic time intervals using a single- or multiple-sensor fusion.

An Independent Component Analysis Approach to Motion Noise Cancelation of Cardio-Mechanical Signals.

This paper proposes a new framework for measuring sternal cardio-mechanical signals from moving subjects using multiple sensors. An array of inertial measurement units are attached to the chest wall of subjects to measure the seismocardiogram (SCG) from accelerometers and the gyrocardiogram (GCG) from gyroscopes. A digital signal processing method based on constrained independent component analysis is applied to extract the desired cardio-mechanical signals from the mixture of vibration observations. Electrocardiogram and photoplethysmography modalities are evaluated as reference sources for the constrained independent component analysis algorithm. Experimental studies with 14 young, healthy adult subjects demonstrate the feasibility of extracting seismo- and gyrocardiogram signals from walking and jogging subjects, with speeds of 3.0 mi/h and 4.6 mi/h, respectively. Beat-to-beat and ensemble-averaged features are extracted from the outputs of the algorithm. The beat-to-beat cardiac interval results demonstrate average detection rates of 91.44% during walking and 86.06% during jogging from SCG, and 87.32% during walking and 76.30% during jogging from GCG. The ensemble-averaged pre-ejection period (PEP) calculation results attained overall squared correlation coefficients of 0.9048 from SCG and 0.8350 from GCG with reference PEP from impedance cardiogram. Our results indicate that the proposed framework can improve the motion tolerance of cardio-mechanical signals in moving subjects. The effective number of recordings during day time could be potentially increased by the proposed framework, which will push forward the implementation of cardio-mechanical monitoring devices in mobile healthcare.

Unobtrusive Heartbeat Detection from Mice Using Sensors Embedded in the Nest.

Unobtrusive monitoring of physio-behavioral variables from animals can minimize variability in preclinical research and thereby maximize the potential for clinical translation. In this paper, we present the design, implementation, and validation of an instrumented nest providing continuous recordings of seismocardiogram (SCG) signals and skin temperature. SCG represents the chest-wall vibrations associated with the heartbeat, and can potentially provide a measure by which individual heartbeats can be detected without the need for electrodes or implantable devices. A non-contact electric field sensor placed in proximity to the animal in the nest was also used to detect respiratory dynamics. The setup was tested with a total of six anesthetized mice. To understand the effects of mouse positioning within the nest on signal quality, the error in heartbeat detection at different positions of the sensor on the body was quantified, with a simultaneously-obtained electrocardiogram (ECG) as the reference standard. At the optimal placement determined with this approach, multiple perturbations were performed such as pinching, changing ambient temperature, and norepinephrine injection to modulate physiology and assess measurement capability. Heartbeat intervals obtained from the ECG and SCG during the perturbations were correlated (R2=0.82) and were in agreement according to Bland-Altman methods (bias: 0.006ms, 95% confidence interval: [-3.79, 3.78]ms) suggesting that SCG can be reliably used for unobtrusive heartbeat detection. Accordingly, the setup can provide a means by which individual heartbeats - and thereby heart rate and heart rate variability indices - can be quantified without the need for any sensors to be attached to the body of the animal.

The clinical evaluation of the CADence device in the acoustic detection of coronary artery disease.

The noninvasive detection of turbulent coronary flow may enable diagnosis of significant coronary artery disease (CAD) using novel sensor and analytic technology. Eligible patients (n = 1013) with chest pain and CAD risk factors undergoing nuclear stress testing were studied using the CADence (AUM Cardiovascular Inc., Northfield MN) acoustic detection (AD) system. The trial was designed to demonstrate non-inferiority of AD for diagnostic accuracy in detecting significant CAD as compared to an objective performance criteria (sensitivity 83% and specificity 80%, with 15% non-inferiority margins) for nuclear stress testing. AD analysis was blinded to clinical, core lab-adjudicated angiographic, and nuclear data. The presence of significant CAD was determined by computed tomographic (CCTA) or invasive angiography. A total of 1013 subjects without prior coronary revascularization or Q-wave myocardial infarction were enrolled. Primary analysis was performed on subjects with complete angiographic and AD data (n = 763) including 111 subjects (15%) with severe CAD based on CCTA (n = 34) and invasive angiography (n = 77). The sensitivity and specificity of AD were 78% (p = 0.012 for non-inferiority) and 35% (p < 0.001 for failure to demonstrate non-inferiority), respectively. AD results had a high 91% negative predictive value for the presence of significant CAD. AD testing failed to demonstrate non-inferior diagnostic accuracy as compared to the historical performance of a nuclear stress OPC due to low specificity. AD sensitivity was non-inferior in detecting significant CAD with a high negative predictive value supporting a potential value in excluding CAD.

Arduino control of a pulsatile flow rig.

This note describes the design and testing of a programmable pulsatile flow pump using an Arduino micro-controller. The goal of this work is to build a compact and affordable system that can relatively easily be programmed to generate physiological waveforms. The system described here was designed to be used in an in-vitro set-up for vascular access hemodynamics research, and hence incorporates a gear pump that delivers a mean flow of 900 ml/min in a test flow loop, and a peak flow of 1106 ml/min. After a number of simple identification experiments to assess the dynamic behaviour of the system, a feed-forward control routine was implemented. The resulting system was shown to be able to produce the targeted representative waveform with less than 3.6% error. Finally, we outline how to further increase the accuracy of the system, and how to adapt it to specific user needs.

[Pressure sensors to prevent cardiac decompensation]. / Des capteurs de pression pour prévenir la décompensation cardiaque.

Most cases of hospitalisation for heart failure are preceded by episodes of cardiac decompensation. Preventing these episodes would improve quality of life and reduce mortality and treatment costs. The monitoring of intracardiac pressures, using innovative sensors, coupled with telemedicine, offers interesting perspectives.

Minimally invasive estimation of ventricular dead space volume through use of Frank-Starling curves.

This paper develops a means of more easily and less invasively estimating ventricular dead space volume (Vd), an important, but difficult to measure physiological parameter. Vd represents a subject and condition dependent portion of measured ventricular volume that is not actively participating in ventricular function. It is employed in models based on the time varying elastance concept, which see widespread use in haemodynamic studies, and may have direct diagnostic use. The proposed method involves linear extrapolation of a Frank-Starling curve (stroke volume vs end-diastolic volume) and its end-systolic equivalent (stroke volume vs end-systolic volume), developed across normal clinical procedures such as recruitment manoeuvres, to their point of intersection with the y-axis (where stroke volume is 0) to determine Vd. To demonstrate the broad applicability of the method, it was validated across a cohort of six sedated and anaesthetised male Pietrain pigs, encompassing a variety of cardiac states from healthy baseline behaviour to circulatory failure due to septic shock induced by endotoxin infusion. Linear extrapolation of the curves was supported by strong linear correlation coefficients of R = 0.78 and R = 0.80 average for pre- and post- endotoxin infusion respectively, as well as good agreement between the two linearly extrapolated y-intercepts (Vd) for each subject (no more than 7.8% variation). Method validity was further supported by the physiologically reasonable Vd values produced, equivalent to 44.3-53.1% and 49.3-82.6% of baseline end-systolic volume before and after endotoxin infusion respectively. This method has the potential to allow Vd to be estimated without a particularly demanding, specialised protocol in an experimental environment. Further, due to the common use of both mechanical ventilation and recruitment manoeuvres in intensive care, this method, subject to the availability of multi-beat echocardiography, has the potential to allow for estimation of Vd in a clinical environment.

A Novel Point-of-Care Smartphone Based System for Monitoring the Cardiac and Respiratory Systems.

Cardio-respiratory monitoring is one of the most demanding areas in the rapidly growing, mobile-device, based health care delivery. We developed a 12-lead smartphone-based electrocardiogram (ECG) acquisition and monitoring system (called "cvrPhone"), and an application to assess underlying ischemia, and estimate the respiration rate (RR) and tidal volume (TV) from analysis of electrocardiographic (ECG) signals only. During in-vivo swine studies (n = 6), 12-lead ECG signals were recorded at baseline and following coronary artery occlusion. Ischemic indices calculated from each lead showed statistically significant (p < 0.05) increase within 2 min of occlusion compared to baseline. Following myocardial infarction, spontaneous ventricular tachycardia episodes (n = 3) were preceded by significant (p < 0.05) increase of the ischemic index ~1-4 min prior to the onset of the tachy-arrhythmias. In order to assess the respiratory status during apnea, the mechanical ventilator was paused for up to 2 min during normal breathing. We observed that the RR and TV estimation algorithms detected apnea within 7.9 ± 1.1 sec and 5.5 ± 2.2 sec, respectively, while the estimated RR and TV values were 0 breaths/min and less than 100 ml, respectively. In conclusion, the cvrPhone can be used to detect myocardial ischemia and periods of respiratory apnea using a readily available mobile platform.

Impact of haemodynamic SonR sensor on monitoring of left ventricular function in patients undergoing cardiac resynchronization therapy.

AIMS: The haemodynamic SonR sensor is able to measure myocardial contractility. The isometric effort is useful in quantifying left ventricular (LV) performance. We investigated the amplitude changes in SonR signal over time and during static exercise according to the recovery of the left ventricle. METHODS AND RESULTS: Twenty five patients [18 male, 70 ± 8 years, LV ejection fraction (LVEF) 29 ± 5%, in sinus rhythm] underwent biventricular SonR implantable cardioverter defibrillator implant. After procedure and at 6 months, each patient underwent detection of SonR signal and continuous measurement of blood pressure, at rest and during isometric effort. During evaluation at baseline device was programmed in VVI at 40 bpm while in DDD at 60 bpm at follow-up. At 6 months, LV reverse remodelling was investigated. Cardiac resynchronization therapy patients were considered responders when an absolute improvement in LV ejection fraction ≥ 5% occurred. At 6 months, 14 (56%) patients were responders and 11 (44%) non-responders (mean LVEF 40 ± 10% vs. 27 ± 6%, respectively). In responders, SonR value did not significantly change at follow-up compared to baseline (P = 0.894). At follow-up, SonR value was not significantly different between two groups (P = 0.651). SonR signal significantly increased during isometric effort in responders (P = 0.002) while it slightly decreased in non-responders at follow-up (P = 0.572). No differences were observed in response to isometric effort between two groups at baseline (P = 0.182, P = 0.069, respectively). CONCLUSIONS: The absolute SonR amplitude provides limited information on the status of LV performance. The variation in SonR signal during static exercise is more likely to identify responders at follow-up.

Sleep bruxism associated with obstructive sleep apnoea syndrome - A pilot study using a new portable device.

Sleep bruxism (SB) and obstructive sleep apnoea syndrome (OSAS) share common pathophysiologic pathways. We aimed to study the presence and relationship of SB in a OSAS population. Patients referred with OSAS suspicion and concomitant SB complains were evaluated using a specific questionnaire, orofacial evaluation and cardio-respiratory polygraphy that could also monitor audio and EMG of the masseter muscles. From 11 patients studied 9 had OSAS. 55.6% were male, mean age was 46.3±11.3 years, and apnea hypopnea index of 11.1±5.7/h. Through specific questionnaire 55.6% had SB criteria. Orofacial examination (only feasible in 3) confirmed tooth wear in all. 77.8% had polygraphic SB criteria (SB index>2/h). Mean SB index was 5.12±3.6/h, phasic events predominated (72.7%). Concerning tooth grinding episodes, we found a mean of 10.7±9.2 per night. All OSAS patients except two (77.8%) had more than two audible tooth-grinding episodes. These two patients were the ones with the lowest SB index (1.0 and 1.4 per hour). Only in one patient could we not detect tooth grinding episodes. There was a statistically significant positive correlation between tooth grinding episodes and SB index and phasic event index (R=0.755, p=0.019 and R=0.737, p=0.023 respectively, Pearson correlation). Mean apnoea to bruxism index was 0.4/h, meaning that only a minority of SB events were not secondary to OSAS. We could not find any significant correlation between AHI and bruxism index or phasic bruxism index (R=-0.632 and R=-0.611, p>0.05, Pearson correlation). This pilot study shows that SB is a very common phenomenon in a group of mild OSAS patients, probably being secondary to it in the majority of cases. The new portable device used may add diagnostic accuracy and help to tailor therapy in this setting.

A novel approach to diagnosing coronary artery disease: acoustic detection of coronary turbulence.

Atherosclerotic disease within coronary arteries causes disruption of normal, laminar flow and generates flow turbulence. The characteristic acoustic waves generated by coronary turbulence serve as a novel diagnostic target. The frequency range and timing of microbruits associated with obstructive coronary artery disease (CAD) have been characterized. Technological advancements in sensor, data filtering and analytic capabilities may allow use of intracoronary turbulence for diagnostic and risk stratification purposes. Acoustic detection (AD) systems are based on the premise that the faint auditory signature of obstructive CAD can be isolated and analyzed to provide a new approach to noninvasive testing. The cardiac sonospectrographic analyzer, CADence, and CADScore systems are early-stage, investigational and commercialized examples of AD systems, with the latter two currently undergoing clinical testing with validation of accuracy using computed tomography and invasive angiography. Noninvasive imaging accounts for a large percentage of healthcare expenditures for cardiovascular disease in the developed world, and the growing burden of CAD will disproportionately affect areas in the developing world. AD is a portable, radiation-free, cost-effective method with the potential to provide accurate diagnosis or exclusion of significant CAD. AD represents a model for digital, miniaturized, and internet-connected diagnostic technologies.

The Impact of Direct Cardiac Output Determination On Using A Widely Available Direct Continuous Oxygen Consumption Measuring Device On The Hemodynamic Assessment of Aortic Valve.

BACKGROUND: Accurate assessment of cardiac output (CO) is essential for the hemodynamic assessment of aortic valve area (AVA). Estimation of oxygen consumption (VO2) and Thermodilution (TD) is employed in many cardiac catheterization laboratories (CCL) given the historically cumbersome nature of direct continuous VO2 measurement, the "gold standard" for this technique. A portable facemask device simplifies the direct continuous measurement of VO2, allowing for relatively rapid and continuous assessment of CO and AVA. METHODS AND MATERIALS: Seventeen consecutive patients undergoing right heart catheterization had simultaneous determination of CO by both direct continuous and assumed VO2 and TD. Assessments were only made when a plateau of VO2 had occurred. All measurements of direct continuous and assumed VO2, as well as, TD CO were obtained in triplicate. RESULTS: Direct continuous VO2 CO and assumed VO2 CO correlated poorly (R= 0.57; ICC =0.59). Direct continuous VO2 CO and TD CO also correlated poorly (R= 0.51; ICC=0.60). Similarly AVA derived from direct continuous VO2 correlated poorly with those of assumed VO2 (R= 0.68; ICC=0.55) and TD (R=0.66, ICC=0.60). Repeated direct continuous VO2 CO and AVA measurements were extremely correlated and reproducible [(R=0.93; ICC=0.96) and (R=0.99; ICC>0.99) respectively], suggesting that this was the most reliable measurement of CO. CONCLUSIONS: CO calculated from direct continuous VO2 measurement varies substantially from both assumed VO2 and TD based CO, which are widely used in most CCL. These differences may significantly impact the CO and AVA measurements. Furthermore, continuous, rather than average, measurement of VO2 appears to give highly reproducible results.

A low-power and miniaturized electrocardiograph data collection system with smart textile electrodes for monitoring of cardiac function.

With the increasing aging population as well as health concerns, chronic heart disease has become the focus of public attention. A comfortable, low-powered, and wearable electrocardiogram (ECG) system for continuously monitoring the elderly's ECG signals over several hours is important for preventing cardiovascular diseases. Traditional ECG monitoring apparatus is often inconvenient to carry, has many electrodes to attach to the chest, and has a high-power consumption. There is also a challenge to design an electrocardiograph that satisfies requirements such as comfort, confinement, and compactness. Based on these considerations, this study presents a biosensor acquisition system for wearable, ubiquitous healthcare applications using three textile electrodes and a recording circuit specialized for ECG monitoring. In addition, several methods were adopted to reduce the power consumption of the device. The proposed system is composed of three parts: (1) an ECG analog front end (AFE), (2) digital signal processing and micro-control circuits, and (3) system software. Digital filter methods were used to eliminate the baseline wander, skin contact noise, and other interfering signals. A comparative study was conducted using this system to observe its performance with two commercial Holter monitors. The experimental results demonstrated that the total power consumption of this proposed system in a full round of ECG acquisition was only 29.74 mW. In addition, this low-power system performed well and stably measured the heart rate with an accuracy of 98.55 %. It can also contain a real-time dynamic display with organic light-emitting diodes (OLED) and wirelessly transmit information via a Bluetooth 4.0 module.